‘Air Fusion’ Hot and Cold Carbonated Bottle Watercooler
The Air Fusion watercooler is designed for use with a supply of portable water.
This unit is suitable for indoor use in domestic, commercial & industrial locations.
This watercooler is designed with a removable reservoir. The reservoir can be replaced with a sanitised unit during routine maintenance services.
The cold water temperature is preset at the factory at approximately 4°C (39°F) – the water temperature is controlled by a thermostat that is located on the back of the unit. Cold water temperatures may be adjusted via a slotted screw on the body of the control (can be accessed through the hole in the metal finger plate on the back of the unit.). Turning this screw in the
clockwise direction will make the water colder (and vice versa).
Hot Water System
The hot water temperature is preset at the factory at approximately 88°C (190°F) – the water temperature is controlled by a thermostat that is located on the hot tank. Hot water temperatures may be adjusted depending on the hot tank model.
Carbonated Water Circuit
The carbonation level of the water is based on coldness of the water and pressure of the CO2 bottle, and the setting of the flow regulator. The carbonation level in the water can be increased by either raising the CO2 pressure (which is adjustable in some models) or reducing the temperature of the CO2 water, or adjusting the flow regulator (which is accessible through the
right side panel).
Ambient Water Circuit
The water in the ambient water circuit is not cooled – the temperature of the water will be the same as the temperature of the water that comes out of the bottle.
Call for details